Treat Engine Overheating with THERMOCURE® Cooling System Rust Remover & Flush

by

revitalize an engine, rust remover, keep engine from overheating, safe rust remover for an engine, water cooled engine, fix engine overheating

Is your car, truck, or tractor overheating? Treat engine overheating with Evapo-Rust® THERMOCURE®. Rust acts as an insulator, can cause vehicles to overheat, and is a serious cause for concern.

THERMOCURE Cooling System Rust Remover & Flush

THERMOCURE® Cooling System Rust Remover & Flush uses an innovative rust and corrosion removal technology that revitalizes any water-cooled engine completely to normal working conditions.

  • Radiators
  • Water Pumps
  • Water Jackets
  • Engine Blocks and Heads

THERMOCURE® is non-toxic. It contains no acids, is biodegradable, safe on the skin, and has no fumes. It contains NO acids, bases, solvents, or other toxic ingredients. It will not harm un-rusted steel and is safe on other metals, plastic, PVC, and most paints.

Steps to Treat Engine Overheating

A THERMOCURE® radiator flush is safe, simple, and easy to use. This product restores the engine’s ability to transfer heat to the coolant allowing engines to run cooler and essentially last longer.

Follow these simple steps to revitalize your engine:

  1. Drain coolant and properly dispose of it. Add 1 qt of THERMOCURE® into the radiator. 
  2. Fill the radiator with clean water and drive it for 2-3 hours. You could drive it normally for 2-3 days for bad cases of rust.
  3. Flush the cooling system 2-3 times with water until the water runs clear. Refill the cooling system with a quality coolant mixed with water according to the manufacturer’s specifications.

Now your cooling system is ready to perform.  

Customer Review

We love to hear from our customers. Here’s a recent one.

“I have a 2000 Wrangler that had a horribly rusted water jacket. I tried probably half a dozen different products; the rust just laughed at all of them. I heard about this stuff and decided to give it a shot. Flushed the coolant system and filled it with a bottle of this and distilled water. I drove it back and forth to work for a week and drained it. After everything I had tried before, I had low expectations, I was really jaded at that point. But when I saw what came out and then pulled the thermostat to check the water jacket, I was honestly amazed. The muck that came out was black, and the water jacket looked like a new casting. I couldn’t believe it. Many coolant system cleaning products claim something they really can’t back up; this is not that. THERMOCURE® is legit. If you have rust in your cooling system, this will get it out. Full stop.” Justin B. 

THERMOCURE® could be what you are looking for to revitalize your engine and get the most from it. 

Tips to Get the Most from a THERMOCURE® Treatment

Here are some tips to get the most from a THERMOCURE® treatment. 

  • The cooling system needs to be completely drained before adding THERMOCURE® for treatment.
  • If the cooling system is very rusty, it may be beneficial to flush it with water before adding THERMOCURE®. 
  • THERMOCURE® should not be used in freezing weather and will not protect your engine against freezing temperatures.
  • One quart of THERMOCURE® may treat two engines or remove rust from other parts or tools.
  • Use a good quality antifreeze to prevent future problems with your cooling system.

Give Your Water-Cooled Engine a Makeover

Ready to give your engine a makeover? Treat your engine to THERMOCURE® Cooling System Rust Remover & Flush. Find a store near you.