Ready to tackle your spring jobs list? Your lawnmower is at the top, right? Getting it rust-free and ready for spring doesn’t have to be a problem. EVAPO-RUST® Rust Remover and EVAPO-RUST® GEL make it easy to remove lawnmower rust.
Steps to Remove Lawnmower Rust
Evapo-Rust® products are water-based, non-corrosive, and contain no acids or alkalis so they are easy to use. However, we do recommend using basic PPE (personal protective equipment) such as gloves, masks, or protective eyewear when working on a project. Soak the item or brush the rust remover on. Allow it to work. Then rinse away the rust with water.
Soakable Lawnmower Parts Derusting Steps
For soakable lawnmower parts, use EVAPO-RUST® Rust Remover to remove lawnmower rust in four easy steps.
Prep
Prep the object by removing excess dirt and oil before soaking. Pour enough EVAPO-RUST® into a container to cover the rusted object completely.
The type of container doesn’t matter since EVAPO-RUST® will not harm unrusted steel, is safe on other metals, and does not affect plastic.
Soak
Immerse the rusty object in the solution and leave it for 30 minutes for light rust or up to overnight for extremely heavy rust.
Rinse
Rinse the item with water when finished. If deep rust remains in pits, re-immerse the item until all the rust is gone. Un-rusted metal will not be affected. NOTE: This stage is especially important in getting the best results.
Finish
When the rust is gone, rinse with water and allow the item to air dry to help prevent rust for up to two weeks. Or spray the item with RUST-BLOCK™ to prevent re-rusting for up to 1-year.
Lawnmower Deck & Nonsoakable Parts De-Rusting Steps
For the lawnmower deck and any parts that you can’t soak, use EVAPO-RUST® GEL and these steps to remove lawn mower rust.
Prep
Prepare the item’s surface by removing any dirt or grease. For best results, avoid using Evapo-Rust® Gel in direct sunlight and at temperatures between 60°F and 90°F.
Apply
Apply Evapo-Rust® Gel with a brush or roll. Wait for 1-2 hours or until rust disappears.
Rinse
It’s time to rinse! Remove with a soft towel and water and wipe dry.
Repeat
Re-apply if needed for heavily corroded areas.
Finish
Rinse with water and allow the item to air dry to prevent rust for up to two weeks. Or spray with RUST-BLOCK™ to prevent re-rusting for up to 1 year.
Other Tips for Prepping Your Lawnmower
Now that the rust is gone get the rest of your mower ready to tackle the grass with these tips
- Drain the fuel and fill it with fresh gas unless it was treated with a stabilizer before the end of the last season.
- Clean, then lubricate the throttle and other moving parts.
- Clean or replace the air filter.
- Change the oil and replace the oil filter.
- Install a new spark plug.
- Sharpen or replace the mower blade.
- Replace the belt or battery.
Remove lawnmower rust and enjoy the spring season! Find Evapo-Rust® products online or at your favorite local retailer. If you have any questions about our rust-removing products, please don’t hesitate to contact customer care at 800.272.8963. For technical support, please call 800.521.3168.